SHARE |
|
by Bill Degnan - 02/16/2007 22:34 | |
Kilobaud Issue #8 -
THere is an article on page 94 titled "SWTP 4K BASIC Notes...implementing it on the 680b. "With the machine up and operating with 8K in low memory, the original 1K memory at location A000 and the Mits monitor at FF00, load the linkage from location A100 to A13A. Then load the 4K BASIC and inspect and compare locations 025F through 026C with the original instructions in the table. Replace the original instructions with the ones listed in the RAM column (missing from this post). Using the Mits monitor J command, type J 0100... contact me if you're interested in a copy of the complete article, or track down Kilobaud Issue #8 Reply |