em  output  as  well  as  program
              output  is  written  to   the   file   specified   by
              filespec.  Output is written  to  the  file  until  a
              subsequent   PUT   CONSOLE  command redirects console
              output back to the console.

  ///2Examples

  A>PUT CONSOLE OUTPUT TO FILE XOUT [ECHO]

       Directs console output to file  XOUT  with the output echoed
       to the console.

  A>PUT PRINTER OUTPUT TO FILE XOUT
  A>MYPROG

       Directs ST=B:OLDLIST

       The file OLDLIST changes to NEWLIST on drive B.   Since  the
       second  drive specifier, B:  is implied by the first one, it
       is unnecessary in this example.  The command line above  has
       the same effect as the following:

          A>REN B:NEWLIST=OLDLIST
                     or
          A>REN NEWLIST=B:OLDLIST

  ///1RMAC

  Syntax:

       RMAC filespec {$Rd | $Sd | $Pd}

  Explanation:

  RMAC, a relocatable macro  assembler,  assembles .ASM  fileVE intercepts the return to the  system
  and prompts the user for the filespec and the bounds of memory to
  be SAVEd.

       SAVE Ver 3.0
       Enter file (type RETURN to exit):dump2.com

  If file DUMP2.COM exists already, the system asks:

       Delete dump2.com? Y

  Then the system asks for the bounds of memory to be saved:

       Beginning hex address: 100
       Ending hex address: 400

  The contents of memory from 100H (Hexadecimal) to 400H is  copied
  to file DUMP2.COM.

 T PRINTER {OUTPUT TO} FILE filespec {option} | PRINTER
      PUT CONSOLE {OUTPUT TO} CONSOLE
      PUT PRINTER {OUTPUT TO} PRINTER

  Explanation:

  PUT puts console or printer  output  to  a  file  for   the  next
  command  entered at the console,  until  the  program terminates.
  Then  console  output  reverts  to the console.  Printer   output
  is   directed   to   a   file   until   the   program terminates.
  Then printer output is put back to the printer.

  PUT  with  the    SYSTEM    the  printer  output  of  program  MYPROG  to  file
       XOUT.  The output is not echoed to the printer.

  A>PUT PRINTER OUTPUT TO FILE XOUT2 [ECHO,SYSTEM]

       Directs all printer output to file XOUT2 as well as  to  the
       printer   (with ECHO option), and the PUT is in effect until
       you enter a PUT PRINTER OUTPUT TO PRINTER command.

  A>PUT CONSOLE OUTPUT TO CONSOLE

       Directs  console  output  back  to  the console.

  A>PUT PRINTER OUTPUT TO PRINTER

       Directss   of
  into .REL files that you can link to create .COM files.

  ///2options

  RMAC options specify the   destination  of  the   output   files.
  Replace d with the destination drive letter for the output files.

                    Option         d=output option

            R- drive for REL file  (A-O, Z)
            S- drive for SYM file  (A-O, X, P, Z)
            P- drive for PRN file  (A-O, X, P, Z)

            A-O specifies drive A-O.
            X means output to the console.
  ///1SET

  Syntax:

          SET [options]
          SET d: [options]
          SET filespec [options]

  Explanation:

  SET  initiates  password   protection   and   time  stamping   of
  files.  It  also  sets  the file and drive attributes Read-Write,
  Read-Only, DIR and SYS.  It  lets  you  label a disk and password
  protect  the  label.  To  enable  time  stamping  of  files,  you
  must  first  run INITDIR to format the disk directory.

  ///2Label

  Syntax:

          SET {d option   directs   all     subsequent
  console/printer   output  to  the  specified  file.  This  option
  terminates when you  enter  the  PUT  CONSOLE  or   PUT   PRINTER
  command.

  ///2Options

             [ {ECHO | NO ECHO} {FILTER | NO FILTER} | {SYSTEM} ]

  ECHO        specifies that output is echoed to the console.  This
              is  the default option when you direct console output
              to a file.

  NO ECHO     specifies that file  output  is  not  echoed  to  the